Z-WB Concrete coating water based (1 liter)
SKU: NCN.BT/Z-WB.1LZ-WB Coating: Innovative Water-Based Protection
Z-WB-Coating, suitable for mineral surfaces such as concrete, stone, natural stone, paving stones, paving stones and more, is a revolutionary water-based nano coating! With this innovation we perfectly meet current wishes and requirements in the field of coatings that protect the environment.
Although all our coatings have been extensively tested and found to be safe, our Z-WB Coating goes one step further. The bonding process takes place naturally, without the use of volatile agents. This makes our water-based coating even more environmentally friendly and safer.
The Z-WB Coating has been developed to give mineral surfaces hydrophobic and oleophobic properties, which protects them against negative external influences and lasts for years longer and contributes to maintaining the aesthetics of the treated material. Moreover, the coating is breathable, which is not unimportant!
Areas of application:
Mineral stone types
Concrete and (masonry) stone
Paving stones and sidewalk tiles
Roof tiles
Wall and floor tiles
Sculptures (antiquities/cultural heritage)
Urban furniture
Usage instructions:
Always read the technical specifications before applying.
Apply the correct amount for optimal effectiveness of the coating.
Take environmental factors into account such as temperature, wind and sunlight.
Always test the coating on the material to be treated to avoid unwanted surprises.
Wear protective clothing and equipment during application.
Note: Make sure you follow the instructions for optimal results. Wholesale nanocoatings (order site of NanoEnzo b.v.) cannot be held responsible for incorrect application of the coating.
Benefits & Key Features:
Water and oil repellent
UV protection
Breathable coating
Easy to clean
Maintain aesthetics
Note: Make sure you follow the instructions for optimal results. Wholesale nanocoatings (order site of NanoEnzo b.v.) cannot be held responsible for incorrect application of the coating.
Specificaties
Verschijning Vloeistof in de mist
Chemische weerstand 11>pH>1
Droge filmdikte 90-100nm
Verbruik per oppervlakte-eenheid 60-100 ml/ m2
Dichtheid @23°C 0,99 g/ cm3
PH waarde 4-5
Ademend vermogen ja
Toepassingstemperatuur 5°C/30°C (≤50% RV)
Temperatuurbestendigheid 250°C
Watercontacthoek 142° bij 10 µL
Water glijhoek 10° bij 20 µL
Oliecontacthoek 101° bij 10 µL