1 liter NanoFlex Concrete & Stone Coating Standard

NanoFlex Concrete & Stone Coating Standard

NanoFlex Concrete & Stone coating Standard is an invisible nano coating for materials such as concrete, brick, natural stone, marlstone and terracotta. Treated surfaces acquire self-cleaning, hydrophobic and oleophobic properties, preventing water, grease, dirt, moss, lichens and fungi from adhering. The surface becomes more resistant to freeze and thaw.

Quality classes: The range of coatings is divided according to the amount of workable substances in the formulation, ranging from Basic to Standard to Premium. Basic is diluted 1:39, Standard 1:19 and Premium 1:13, which means that Basic works excellently on less loaded surfaces (for example vertically placed surfaces) and Premium for heavily loaded and polluting surfaces.
The duration of protection is the same for all three under normal and equal circumstances and can be up to 10 years.

The coating is durable against weather influences, chemical influences and wear due to use, suitable for new and existing buildings, monuments, statues, stairs, paving stones and paving.

This coating is water-based and VOC and PFAS-free, safe and easy to apply.

Application instructions:

Clean the surface to obtain optimal results: remove coarse and visible contamination. For dirty outdoor surfaces, first perform a high-pressure cleaning and rinse thoroughly with clean water.

Apply the coating: Spray NanoFlex water repellent evenly (important, otherwise there is a risk of residue during drying) directly onto the surface until saturated. For large areas, use a garden sprinkler. Then smooth with a roller for an optimal finish. Complete drying takes place after 24 hours.

Advantages:

Long-term protection up to 10 years
Prevents water infiltration, mold and moss growth
Maintains the breathability of the material
Reduces aging effects
Easy to maintain
Maintain aesthetics
Based on nanotechnology
Note: Make sure you follow the instructions for optimal results. Wholesale nanocoatings (order site of NanoEnzo b.v.) cannot be held responsible for incorrect application of the coating.